LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2014 >> Leaf SL >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Electric Converters and Controllers >> EV Control System (Introduction) >> System Description >> System >> Li-Ion Battery Charge Control >> LI-ION BATTERY CHARGE CONTROL: Normal Charge Control >> Basic Control
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Basic Control

When EVSE is connected under the power switch OFF condition, VCM judges that the system is in a charge mode and activates the F/S relay and M/C relay to allow charging operation.

Then, VCM determines the charge power based on the Li-ion battery chargeable power signal received from the Li-ion battery controller and the chargeable power signal received from the PDM (Power Delivery Module). VCM then sends the maximum charge power signal to the PDM (Power Delivery Module).

The PDM (Power Delivery Module) determines a charge power based on the maximum charge power signal and the maximum input current signal sent by the EVSE control box.

Concurrently, the VCM activates the system main relay 1 and system main relay 2. Consequently, Li-ion battery charge starts.

NOTE:
  • Li-ion battery charge does not start when the power switch is ON. When it is required to charge with the power switch ON, start charging before turning ON the power switch.
  • When the charging connector is connected to the charge port in the READY state, READY is turned OFF, the power switch is turned ON, and the shift position is changed to N position.
scientia non olet · About LEMON Manuals