Component Function Check

Regarding Wiring Diagram information, refer to "WIRING DIAGRAM ".

1. PERFORM COMPONENT FUNCTION CHECK 
   1. Turn ignition switch ON.
   2. Check the voltage between ECM harness connectors.

      ECM			Condition		Voltage
      Connector	+	-
      	Terminal	Terminal
      E10	102	112	Selector lever	P or N	Battery voltage
      				Except above	Approx. 0 V

      Fig 1: Checking Voltage Between ECM Harness Connectors Terminals

      Courtesy of NISSAN NORTH AMERICA, INC.

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Go to "DIAGNOSIS PROCEDURE ".