Overall Sequence
- COLLECT INFORMATION FROM THE CUSTOMER
Get detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurred) using the diagnosis worksheet. Refer to "DIAGNOSTIC WORK SHEET ".
: GO TO 2.
- PERFORM SELF DIAGNOSTIC RESULT
Perform self diagnostic result. Refer to "CONSULT FUNCTION (ABS) ".
Are any DTCs displayed?
YES: Refer to "DTC NO. INDEX ".
NO: GO TO 3.
- CHECK SYMPTOM OPERATING CONDITION
Check that the symptom is a normal operating condition. Refer to "DESCRIPTION ".
Is the symptom a normal operating condition?
YES: Inspection End.
NO: GO TO 4.
- CHECK WARNING AND INDICATOR LAMPS OPERATION
Check warning and indicator lamps operation.
- ABS warning lamp: Refer to "DESCRIPTION ".
- Brake warning lamp: Refer to "DESCRIPTION ".
- VDC OFF indicator lamp: Refer to "DESCRIPTION ".
- SLIP indicator lamp: Refer to
"DESCRIPTION ".
Is ON/OFF timing normal?
YES: GO TO 5.
NO: Perform warning lamp diagnosis. Refer to "COMPONENT FUNCTION CHECK " (ABS warning lamp), "COMPONENT FUNCTION CHECK " (brake warning lamp), "COMPONENT FUNCTION CHECK " (VDC OFF indicator lamp) or "COMPONENT FUNCTION CHECK " (SLIP indicator lamp).
- PERFORM DIAGNOSIS APPLICABLE TO THE SYMPTOM
Perform diagnosis applicable to the symptom. Refer to "SYMPTOM TABLE ".
: GO TO 6.
- FINAL CHECK
Perform self diagnostic result again, and check that the malfunction is repaired. After checking, erase the self diagnosis memory. Refer to "CONSULT FUNCTION (ABS) ".
: Inspection End.