LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2014 >> Maxima SV >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P0196 To P0607 >> DTC P0550: PSP Sensor >> Component Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Inspection

  1. CHECK POWER STEERING PRESSURE SENSOR 
    1. Reconnect all harness connectors disconnected.
    2. Start engine and let it idle.
    3. Check the voltage between ECM terminals under the following conditions.
      ECM Condition Voltage
      Connector + -
      Terminal Terminal
      F13 41 (Power steering pressure sensor signal) 48 (Sensor ground) Steering wheel: Being turned. 0.5 - 4.5 V
      Steering wheel: Not being turned. 0.4 - 0.8 V
      Fig 1: Checking Voltage Between ECM Terminals
      G05869896Courtesy of NISSAN NORTH AMERICA, INC.

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace power steering pressure sensor. Refer to "EXPLODED VIEW ".

scientia non olet · About LEMON Manuals