LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2014 >> NV3500 HD SL >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System >> System Description >> System >> VDC/TCS/Abs >> VDC/TCS/ABS: TCS Function >> Input And Output Signals
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Input And Output Signals

Major signal transmission between each unit via communication lines is shown in the following table.

Component Signal description
Yaw rate/side/decel G sensor Mainly transmits the following signals to ABS actuator and electric unit (control unit) via communication line(1).
  • Yaw rate signal
  • Side G sensor signal
  • Decel G sensor signal
ECM Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication.
  • Accelerator pedal position signal
  • Engine speed signal

    Mainly receives the following signals from ABS actuator and electric unit (control unit) via CAN communication.

  • Target throttle position signal
TCM Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication.
  • Shift position signal
Steering angle sensor Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication.
  • Steering angle sensor signal
Combination meter Mainly receives the following signals from ABS actuator and electric unit (control unit) via CAN communication.
  • SLIP indicator lamp signal
  • VDC OFF indicator lamp
(1) Communication line between yaw rate/side/decel G sensor and ABS actuator and electric unit (control unit)
scientia non olet · About LEMON Manuals