DTC Detection Logic

NOTE:

If DTC B261A is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to "DTC LOGIC ".
If DTC B261A is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to "DTC LOGIC ".

DTC No.	Trouble diagnosis name	DTC detecting condition	Possible cause
B261A	PUSH-BTN IGN SW	BCM detects the mismatch between the following for 1 second or more Push-button ignition switch operation condition judged by push switch signal Push-button ignition switch status signal from IPDM E/R (CAN)	Harness or connectors (Push-button ignition switch circuit is open or shorted) IPDM E/R BCM