Data Monitor
WARNING: This page is about a different car, the 2016 Nissan Rogue. However, it is still accessible from the selected car via links, so may be relevant.
| Monitor Item [Unit] | Description |
|---|---|
| REVERSE SIGNAL [Open/Close] | Indicates condition of transmission range switch R (Reverse) position. |
| IGN RELAY [Open/Close] | Indicates condition of ignition relay-1. |
| PUSH SW [Open/Close] | Indicates condition of push-button ignition switch. |
| INTERLOCK/PNP SW [Open/Close] | Indicates condition of transmission range switch P (Park) and N (Neutral) positions. |
| OIL PRESSURE SW [Open/Close] | Indicates condition of oil pressure switch. |
| HOOD SW [Open/Close] | Indicates condition of hood switch. |
| COMPRESSOR [OFF/ON] | Indicates condition of A/C compressor. |
| HORN RELAY [OFF/ ON] | Indicates condition of horn relay. |
| COOLING FAN [OFF/ON] | Indicates condition of cooling fan relay-1. |
| FRONT WIPER HI/LO RELAY [OFF/ON] | Indicates condition of front wiper high relay. |
| FRONT WIPER RELAY [OFF/ON] | Indicates condition of front wiper relay. |
| IGN RELAY OFF STATUS [OFF/ON] | Indicates condition of ignition relay-1 OFF status. |
| IGN RELAY ON STATUS [OFF/ON] | Indicates condition of ignition relay-1 ON status. |
| COOLING FAN RELAY 1 [OFF/ON] | Indicates condition of cooling fan relay-1. |
| STARTER RELAY [OFF/ON] | Indicates condition of starter relay. |
| COMP ECV DUTY [%] | Indicates condition of A/C compressor. |
| COOLING FAN RELAY 2 [%] | Indicates condition of cooling fan relay-2. |
| FR FOG LAMP LH [%] | Indicates condition of front fog lamp LH. |
| FR FOG LAMP RH [%] | Indicates condition of front fog lamp RH. |
| PARKING LAMP [%] | Indicates condition of parking lamp. |
| TAIL LAMP LH [%] | Indicates condition of tail lamp LH. |
| TAIL LAMP RH [%] | Indicates condition of tail lamp RH. |
| DAYTIME RUNNING LIGHT LH [%] | Indicates condition of daytime running light LH. |
| DAYTIME RUNNING LIGHT RH [%] | Indicates condition of daytime running light RH. |
| HEADLAMP (HI) LH [%] | Indicates condition of headlamp high beam LH. |
| HEADLAMP (HI) RH [%] | Indicates condition of headlamp high beam RH. |
| HEADLAMP (LO) LH [%] | Indicates condition of headlamp low beam LH. |
| HEADLAMP (LO) RH [%] | Indicates condition of headlamp low beam RH. |
| A/C RELAY STUCK [NG/OK] | Indicates condition of A/C relay. |
| A/C RELAY [Off/On] | Indicates condition of A/C relay. |
| COMP ECV STATUS [NG/OK] | Indicates condition of A/C compressor. |
| VEHICLE SECURITY HORN [Off/On] | Indicates condition of horn relay. |
| BATTERY CURRENT SENSOR [NG/OK] | Indicates condition of battery current sensor. |
| FRONT FOG LAMP [Off/On] | Indicates condition of front fog lamps. |
| COMP ECV CURRENT [A] | Indicates condition of A/C compressor current. |
| BATTERY VOLTAGE [V] | Indicates condition of battery voltage. |
| COOLING FAN DUTY [%] | Indicates condition of cooling fans. |
| HOOD SW (CAN) [OPEN/CLOSE] | Indicates condition of hood switch. |
| FRONT WIPER [STOP/LOW/HIGH] | Indicates condition of front wiper motor. |
| FR WIPER STOP POSITION [STOP P/ACTIVE P] | Indicates condition of front wiper motor stop. |
| HEADLAMP (HI) [Off/On] | Indicates condition of headlamp high beams. |
| HEADLAMP (LO) [Off/On] | Indicates condition of headlamp low beams. |
| IGNITION RELAY STATUS [Off/On] | Indicates condition of ignition relay-1. |
| IGN RELAY MONITOR [Off/On] | Indicates condition of ignition relay-1 feedback. |
| IGNITION POWER SUPPLY [Off/On] | Indicates condition of ignition relay-1. |
| INTERLOCK/PNP SW (CAN) [Off/On] | Indicates condition of transmission range switch P (Park) and N (Neutral) positions. |
| PUSH-BUTTON IGN SW (CAN) [Off/On] | Indicates condition of push-button ignition switch. |
| TAIL LAMP [Off/On] | Indicates condition of tail lamps. |
| REVERSE SIGNAL (CAN) [Off/On] | Indicates condition of transmission range switch R (Reverse) position. |
| ST&ST CONT RELAY STATUS [Off/ST R On] | Indicates condition of starter cut and starter relays. |
| STARTER MOTOR STATUS [Off/On] | Indicates condition of starter motor. |
| STARTER RELAY (CAN) [LOW/HIGH] | Indicates condition of starter relay. |
| IPDM NOT SLEEP [NO RDY/RDY] | Indicates condition of IPDM E/R sleep status. |
| AFTER COOLING TIME [No request/Request] | Indicates condition of cooling fan request. |
| AFTER COOLING SPEED [%] | Indicates condition of cooling fans. |
| COOLING FAN TYPE [NISSAN/RENAULT] | Indicates cooling fan type. |
| COMPRESSOR REQ1 [Off/On] | Indicates condition of A/C compressor request. |
| VHCL SECURITY HORN REQ [Off/On] | Indicates condition of horn relay request. |
| DTRL REQ [Off/On] | Indicates condition of daytime running light request. |
| SLEEP/WAKE UP [WAKEUP/SLEEP] | Indicates condition of IPDM E/R sleep/wake. |
| CRANKING ENABLE-TCM [NG/OK] | Indicates condition of crank enable from TCM. |
| CRANKING ENABLE-ECM [NG/OK] | Indicates condition of crank enable from ECM. |
| CAN DIAGNOSIS [NG/OK] | Indicates condition of CAN diagnosis. |
| FRONT FOG LAMP REQ [Off/On] | Indicates condition of front fog lamp request. |
| HIGH BEAM REQ [Off/On] | Indicates condition of headlamp high beam request. |
| HORN CHIRP [Off/On] | Indicates condition of horn relay request. |
| COOLING FAN REQ [%] | Indicates condition of cooling fan request. |
| ENGINE STATUS [STOP/RUN/IDLING] | Indicates condition of engine status. |
| TURN SIGNAL REQ [Off/LH/RH] | Indicates condition of turn signal request. |
| FR WIPER REQ [RETURN/LOW/HIGH] | Indicates condition of front wiper motor request. |
| SHIFT POSITION [P/R/N/D/L] | Indicates condition of transmission range switch positions. |
| LOW BEAM REQ [Off/On] | Indicates condition of headlamp low beam request. |
| POSITION LIGHT REQ [Off/On] | Indicates condition of parking lamp request. |
| COMPRESSOR REQ2 [Off/On] | Indicates condition of A/C compressor request. |
| IGNITION SW [Off/On] | Indicates condition of ignition switch. |
| VEHICLE SPEED (METER) [mph/km/h] | Indicates vehicle speed. |
| STARTER OPERATION COUNT | Displays the number of times the starter motor is turned ON. |
| H/P F/PUMP OPERATN COUNT | Displays the number of times the high pressure fuel pump is turned ON. |
| BAT DISCHARGE COUNT [-] |
Monitor the cumulative discharge value of the battery.
NOTE:
When 65, 000 or more is counted, replace the battery. |
| P LAMP CIRC MALFUNCTN [0 - 1] |
Monitor the number of times that the smart FET in IPDM E/R reaches the retry upper limit of the parking lamp circuit.
NOTE:
When the number of parking lamp circuit retries count is 20, this item counts 1. |
| NMB P LAMP CIRC RETRY [0 - 20] |
Monitor the number of times that the smart FET in IPDM E/R permits the retry of the parking lamp circuit.
NOTE:
When the number of short circuits in the parking lamp circuit count is 5 and the ignition switch OFF to ON operation is detected, this item counts 1. |
| NMB P LAMP CIRC SHORT [0 - 5] |
Monitor the number of times that the smart FET in IPDM E/R detects the over current of the parking lamp circuit. |
| DTRL LH CIRC MALFUNCTN [0 - 1] |
Monitor the number of times that the smart FET in IPDM E/R reaches the retry upper limit of the daytime running light (left) circuit.
NOTE:
When the number of daytime running light (left) circuit retries count is 20, this item counts 1. |
| NMB DTRL LH CIRC RETRY [0 - 20] |
Monitor the number of times that the smart FET in IPDM E/R permits the retry of the daytime running light (left) circuit.
NOTE:
When the number of short circuits in the daytime running light (left) circuit count is 5 and the ignition switch OFF to ON operation is detected, this item counts 1. |
| NMB DTRL LH CIRC SHORT [0 - 5] |
Monitor the number of times that the smart FET in IPDM E/R detects the over current of the daytime running light (left) circuit. |
| DTRL RH CIRC MALFUNCTN [0 - 1] |
Monitor the number of times that the smart FET in IPDM E/R reaches the retry upper limit of the daytime running light (right) circuit.
NOTE:
When the number of daytime running light (right) circuit retries count is 20, this item counts 1. |
| NMB DTRL RH CIRC RETRY [0 - 20] |
Monitor the number of times that the smart FET in IPDM E/R permits the retry of the daytime running light (right) circuit.
NOTE:
When the number of short circuits in the daytime running light (right) circuit count is 5 and the ignition switch OFF to ON operation is detected, this item counts 1. |
| NMB DTRL RH CIRC SHORT [0 - 5] |
Monitor the number of times that the smart FET in IPDM E/R detects the over current of the daytime running light (right) circuit. |
| F FOG LH CIRC MALFUNCTN [0 - 1] |
Monitor the number of times that the smart FET in IPDM E/R reaches the retry upper limit of the front fog lamp (left) circuit.
NOTE:
When the number of front fog lamp (left) circuit retries count is 20, this item counts 1. |
| NMB F FOG LH CIRC RETRY [0 - 20] |
Monitor the number of times that the smart FET in IPDM E/R permits the retry of the front fog lamp (left) circuit.
NOTE:
When the number of short circuits in the front fog lamp (left) circuit count is 5 and the ignition switch OFF to ON operation is detected, this item counts 1. |
| NMB F FOG LH CIRC SHORT [0 - 5] |
Monitor the number of times that the smart FET in IPDM E/R detects the over current of the front fog lamp (left) circuit. |
| F FOG RH CIRC MALFUNCTN [0 - 1] |
Monitor the number of times that the smart FET in IPDM E/R reaches the retry upper limit of the front fog lamp (right) circuit.
NOTE:
When the number of front fog lamp (right) circuit retries count is 20, this item counts 1. |
| NMB F FOG RH CIRC RETRY [0 - 20] |
Monitor the number of times that the smart FET in IPDM E/R permits the retry of the front fog lamp (right) circuit.
NOTE:
When the number of short circuits in the front fog lamp (right) circuit count is 5 and the ignition switch OFF to ON operation is detected, this item counts 1. |
| NMB F FOG RH CIRC SHORT [0 - 5] |
Monitor the number of times that the smart FET in IPDM E/R detects the over current of the front fog lamp (right) circuit. |
| HL (HI) LH CIRC MALFUNCTN [0 - 1] |
Monitor the number of times that the smart FET in IPDM E/R reaches the retry upper limit of the headlamp (HI) (left) circuit.
NOTE:
When the number of headlamp (HI) (left) circuit retries count is 20, this item counts 1. |
| NMB HL (HI) LH CIRC RETRY [0 - 20] |
Monitor the number of times that the smart FET in IPDM E/R permits the retry of the headlamp (HI) (left) circuit.
NOTE:
When the number of short circuits in the headlamp (HI) (left) circuit count is 5 and the ignition switch OFF to ON operation is detected, this item counts 1. |
| NMB HL (HI) LH CIRC SHORT [0 - 5] |
Monitor the number of times that the smart FET in IPDM E/R detects the over current of the headlamp (HI) (left) circuit. |
| HL (HI) RH CIRC MALFUNCTN [0 - 1] |
Monitor the number of times that the smart FET in IPDM E/R reaches the retry upper limit of the headlamp (HI) (right) circuit.
NOTE:
When the number of headlamp (HI) (right) circuit retries count is 20, this item counts 1. |
| NMB HL (HI) RH CIRC RETRY [0 - 20] |
Monitor the number of times that the smart FET in IPDM E/R permits the retry of the headlamp (HI) (right) circuit.
NOTE:
When the number of short circuits in the headlamp (HI) (right) circuit count is 5 and the ignition switch OFF to ON operation is detected, this item counts 1. |
| NMB HL (HI) RH CIRC SHORT [0 - 5] |
Monitor the number of times that the smart FET in IPDM E/R detects the over current of the headlamp (HI) (right) circuit. |
| HL (LO) LH CIRC MALFUNCTN [0 - 1] |
Monitor the number of times that the smart FET in IPDM E/R reaches the retry upper limit of the headlamp (LO) (left) circuit.
NOTE:
When the number of headlamp (LO) (left) circuit retries count is 20, this item counts 1. |
| NMB HL (LO) LH CIRC RETRY [0 - 20] |
Monitor the number of times that the smart FET in IPDM E/R permits the retry of the headlamp (LO) (left) circuit.
NOTE:
When the number of short circuits in the headlamp (LO) (left) circuit count is 5 and the ignition switch OFF to ON operation is detected, this item counts 1. |
| NMB HL (LO) LH CIRC SHORT [0 - 5] |
Monitor the number of times that the smart FET in IPDM E/R detects the over current of the headlamp (LO) (left) circuit. |
| HL (LO) RH CIRC MALFUNCTN [0 - 1] |
Monitor the number of times that the smart FET in IPDM E/R reaches the retry upper limit of the headlamp (LO) (right) circuit.
NOTE:
When the number of headlamp (LO) (right) circuit retries count is 20, this item counts 1. |
| NMB HL (LO) RH CIRC RETRY [0 - 20] |
Monitor the number of times that the smart FET in IPDM E/R permits the retry of the headlamp (LO) (right) circuit.
NOTE:
When the number of short circuits in the headlamp (LO) (right) circuit count is 5 and the ignition switch OFF to ON operation is detected, this item counts 1. |
| NMB HL (LO) RH CIRC SHORT [0 - 5] |
Monitor the number of times that the smart FET in IPDM E/R detects the over current of the headlamp (LO) (right) circuit. |
| T LAMP LH CIRC MALFUNCTN [0 - 1] |
Monitor the number of times that the smart FET in IPDM E/R reaches the retry upper limit of the tail lamp (left) circuit.
NOTE:
When the number of tail lamp (left) circuit retries count is 20, this item counts 1. |
| NMB T LAMP LH CIRC RETRY [0 - 20] |
Monitor the number of times that the smart FET in IPDM E/R permits the retry of the tail lamp (left) circuit.
NOTE:
When the number of short circuits in the tail lamp (left) circuit count is 5 and the ignition switch OFF to ON operation is detected, this item counts 1. |
| NMB T LAMP LH CIRC SHORT [0 - 5] |
Monitor the number of times that the smart FET in IPDM E/R detects the over current of the tail lamp (left) circuit. |
| T LAMP RH CIRC MALFUNCTN [0 - 1] |
Monitor the number of times that the smart FET in IPDM E/R reaches the retry upper limit of the tail lamp (right) circuit.
NOTE:
When the number of tail lamp (right) circuit retries count is 20, this item counts 1. |
| NMB T LAMP RH CIRC RETRY [0 - 20] |
Monitor the number of times that the smart FET in IPDM E/R permits the retry of the tail lamp (right) circuit.
NOTE:
When the number of short circuits in the tail lamp (right) circuit count is 5 and the ignition switch OFF to ON operation is detected, this item counts 1. |
| NMB T LAMP RH CIRC SHORT [0 - 5] |
Monitor the number of times that the smart FET in IPDM E/R detects the over current of the tail lamp (right) circuit. |
| BATTERY STATUS [OK/NG] |
Monitor the battery status from the battery output. |
| BAT DISCHARGE COUNT [0-100] | Indicates condition of battery discharge. |
| BATTERY STATUS [NG/OK] | Indicates battery status. |