LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2014 >> Rogue Select AWD >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System (Diagnostic Codes & Symptom Tests) >> DTC/Circuit Diagnosis >> DTC P0850: PNP Switch >> Component Function Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Function Check

  1. PERFORM COMPONENT FUNCTION CHECK 
    1. Turn ignition switch ON.
    2. Check the voltage between ECM harness connector and ground.
      ECM Ground Condition Voltage (V)
      Connector Terminal
      E16 102 (PNP signal) Ground Selector lever P or N BATTERY VOLTAGE
      Except above Approx. 0

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Go to "DIAGNOSIS PROCEDURE ".