DTC Detection Logic

WARNING: This page is about a different car, the 2014 Nissan Versa. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: If DTC B210D is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to "DTC LOGIC ".

DTC No.	Trouble diagnosis name	DTC detecting condition	Possible cause
B210D	STARTER RELAY ON	When comparing the following items, IPDM E/R detects that starter relay is stuck in the ON position for 1 second or more. Starter control relay signal (CAN) from BCM Starter relay status signal (CAN) from BCM Starter control relay and starter relay status signal (IPDM E/R input) Starter control relay control signal (IPDM E/R output) Transmission range switch signal input	Harness or connectors (The CAN communication line is open or shorted.) Harness or connectors (Starter relay circuit is open or shorted.) IPDM E/R BCM Starter relay