LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2014 >> Rogue Select AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Security Control System (With Intelligent Key)) >> DTC/Circuit Diagnosis >> DTC B2605: Shift Position >> DTC Logic >> DTC Confirmation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2014 Nissan Versa. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM DTC CONFIRMATION PROCEDURE 
    1. Shift the selector lever to the P position.
    2. Turn ignition switch ON and wait 1 second or more.
    3. Shift the selector lever to the N position and wait 1 second or more.
    4. Shift the selector lever to any position other than P and N, and wait 1 second or more.
    5. Check DTC in Self Diagnostic Result mode of BCM using CONSULT.

      Is DTC detected? 

      YES: Go to "DIAGNOSIS PROCEDURE ".

      NO: Inspection End.

scientia non olet · About LEMON Manuals