DTC Confirmation Procedure

WARNING: This page is about a different car, the 2014 Nissan Versa. However, it is still accessible from the selected car via links, so may be relevant.

PRECONDITIONING
If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

: GO TO 2.
DTC REPRODUCTION PROCEDURE
With CONSULT
1. Turn the ignition switch ON.
2. Perform self diagnosis for "ABS".
  Is DTC "U1002" detected?
  
  YES: Proceed to "DIAGNOSIS PROCEDURE ".
  
  NO: Inspection End.