LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2014 >> Rogue Select AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Engine Control System (Introduction)) >> Basic Inspection >> Fuel Pressure Check >> Work Procedure >> Fuel Pressure Release
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Pressure Release

WARNING: This page is about a different car, the 2014 Nissan Versa. However, it is still accessible from the selected car via links, so may be relevant.
  1. FUEL PRESSURE RELEASE 

    With CONSULT 

    1. Turn ignition switch ON.
    2. Perform "FUEL PRESSURE RELEASE " in "WORK SUPPORT" mode with CONSULT.
    3. Start engine.
    4. After engine stalls, crank it two or three times to release all fuel pressure.
    5. Turn ignition switch OFF.

    Without CONSULT 

    1. Remove fuel pump fuse located in IPDM E/R.
    2. Start engine.
    3. After engine stalls, crank it two or three times to release all fuel pressure.
    4. Turn ignition switch OFF.
    5. Reinstall fuel pump fuse after servicing fuel system.

      : INSPECTION END