LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2014 >> Rogue Select FWD >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Transmission (CVT) >> DTC/Circuit Diagnosis >> Overdrive Control Switch >> Component Function Check
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Component Function Check

  1. CHECK OVERDRIVE CONTROL SWITCH SIGNAL 
    1. Turn ignition switch ON.
    2. Select "Data Monitor" in "TRANSMISSION".
    3. Check the ON/OFF operations of monitor item.
      Monitor item Condition Status
      SPORT MODE SW While pushing overdrive control switch On
      Other conditions Off

      Is the inspection result normal? 

      YES: INSPECTION END.

      NO: Go to "DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals