LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2014 >> Rogue Select FWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security Control System (Without Intelligent Key) >> Ecu Diagnosis Information >> IPDM E/R (Intelligent Power Distribution Module Engine Room) >> Reference Value >> Physical Values
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Physical Values

Terminal No. (Wire color) Description Condition Value (Approx.)
+ - Signal name Input/Output
1 (R) Ground Battery power supply Input Ignition switch OFF Battery voltage
2 (G) Ground Battery power supply Input Ignition switch OFF Battery voltage
3 (L) Ground Starter relay power supply Output When engine is clanking Battery voltage
When engine is not clanking 0 V
4 (W) Ground Cooling fan relay-1 power supply Output Cooling fan operation OFF 0 V
MID or HI Battery voltage
5 (R) Ground Ignition switch START Input Ignition switch OFF, ACC or ON 0 V
Ignition switch START Battery voltage
6 (BR) Ground Battery power supply (Cooling fan relay) Input Ignition switch OFF Battery voltage
7 (P) Ground Cooling fan motor-2 (HI) ground - Cooling fan operation OFF Battery voltage
HI 0 V
8 (G) Ground Cooling fan relay-2 power supply Output Cooling fan operation OFF 0 V
HI Battery voltage
11 (B) Ground Ground - Ignition switch ON 0 V
12 (G) Ground Rear window defogger relay power supply Output Ignition switch ON Rear window defogger switch OFF 0 V
Rear window defogger switch ON Battery voltage
18 (L) Ground Headlamp LO (LH) Output Lighting switch OFF 0 V
Lighting switch 2ND Battery voltage
20 (SB) Ground Headlamp LO (RH) Output Lighting switch OFF 0 V
Lighting switch 2ND Battery voltage
21 (G) Ground Headlamp HI (LH) Output Lighting switch OFF 0 V
  • Lighting switch 2ND and HI
  • Lighting switch PASS
 Battery voltage
22 (LG) Ground Headlamp HI (RH) Output Lighting switch OFF 0 V
  • Lighting switch 2ND and HI
  • Lighting switch PASS
 Battery voltage
23 (W) Ground Oil pressure switch Input Ignition switch ON Engine stopped 0 V
Engine running Battery voltage
24 (Y) Ground Front wiper auto stop Input Ignition switch ON Front wiper stop position 0 V
Any position other than front wiper stop position Battery voltage
25 (B) Ground Ground - Ignition switch ON 0 V
26 (P) - CAN-L Input/Output - -
27 (L) - CAN-H Input/Output - -
31 (LG) Ground Cooling fan relay-4 control Output Cooling fan operation OFF Battery voltage
LO 0 - 1.0 V
32 (V) Ground Throttle control motor relay control Input After passing approximately 2 seconds or more after turning the ignition switch from ON to OFF Battery voltage
  • Ignition switch ON
  • For approximately 2 seconds after turning ignition switch from ON to OFF
 0 - 1.0 V
33 (GR) Ground Fuel pump relay control Input Ignition switch OFF 0 V
Ignition switch ON Engine stopped Battery voltage
Engine running 0.8 V
37 (R) Ground Tail, license plate lamps and illuminations Output Lighting switch OFF 0 V
Lighting switch 1ST Battery voltage
38 (R) Ground Parking lamp (LH) Output Lighting switch OFF 0 V
Lighting switch 1ST Battery voltage
39 (GR) Ground Parking lamp (RH) Output Lighting switch OFF 0 V
Lighting switch 1ST Battery voltage
40 (BR) Ground Ignition relay power supply Output Ignition switch OFF or ACC 0 V
Ignition switch ON Battery voltage
41 (W) Ground Ignition relay power supply Output Ignition switch OFF or ACC 0 V
Ignition switch ON Battery voltage
42 (L) Ground Front wiper HI Output Ignition switch ON Front wiper switch OFF Battery voltage
Front wiper switch HI 0 V
43 (G) Ground Front wiper LO Output Ignition switch ON Front wiper switch OFF 0 V
Front wiper switch LO Battery voltage
45 (Y) Ground Starter relay power supply Input Ignition switch ON Selector lever "P" or "N" Battery voltage
Selector lever in any position other than "P" or "N" 0 V
46 (W) Ground Fuel pump relay power supply Output
  • Ignition switch OFF or ACC
  • After passing approximately 1 second or more after turning the ignition switch ON
 0 V
  • For approximately 1 second after turning the ignition switch ON
  • Engine running
 Battery voltage
47 (BR) Ground ECM relay power supply Output After passing approximately 4 seconds or more after turning the ignition switch from ON to OFF 0 V
  • Ignition switch ON
  • For approximately 4 seconds after turning ignition switch from ON to OFF
 Battery voltage
48 (R) Ground ECM relay power supply Output After passing approximately 4 seconds or more after turning the ignition switch from ON to OFF 0 V
  • Ignition switch ON
  • For approximately 4 seconds after turning ignition switch from ON to OFF
 Battery voltage
50 (G) Ground Cooling fan relay-5 control Output Cooling fan operation OFF Battery voltage
MID or HI 0 - 1.0 V
51 (L) Ground ECM relay control Output After passing approximately 4 seconds or more after turning the ignition switch from ON to OFF Battery voltage
  • Ignition switch ON
  • For approximately 4 seconds after turning ignition switch from ON to OFF
 0 - 1.0 V
52 (P) Ground Throttle control motor relay power supply Output After passing approximately 2 seconds or more after turning the ignition switch from ON to OFF 0 V
  • Ignition switch ON
  • For approximately 2 seconds after turning ignition switch from ON to OFF
 Battery voltage
55 (BG) Ground A/C relay power supply Output Engine stopped 0 V
Engine running A/C switch OFF 0 V
A/C switch ON (A/C compressor is operating) Battery voltage
56 (SB) Ground Ignition switch ON Input Ignition switch OFF or ACC 0 V
Ignition switch ON Battery voltage
57 (V) Ground Horn relay control Output The horn is not activated Battery voltage
The horn is activated 0 V
58 (LG) Ground Ignition relay power supply Output Ignition switch OFF or ACC 0 V
Ignition switch ON Battery voltage
59 (BR) Ground Ignition relay power supply Output Ignition switch OFF or ACC 0 V
Ignition switch ON Battery voltage
60 (SB) Ground Ignition relay power supply Output Ignition switch OFF or ACC 0 V
Ignition switch ON Battery voltage
61 (R) Ground ECM power supply Output Ignition switch OFF Battery voltage
scientia non olet · About LEMON Manuals