LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2014 >> Rogue Select FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Security Control System (With Intelligent Key)) >> Basic Inspection >> Additional Service When Replacing Control Unit >> ECM >> ECM: Work Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

ECM: Work Procedure

WARNING: This page is about a different car, the 2014 Nissan Versa. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM INITIALIZATION OF NATS SYSTEM AND REGISTRATION OF ALL NATS IGNITION KEY IDS 

    Refer to "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT: SPECIAL REPAIR REQUIREMENT ".

    : GO TO 2.

  2. PERFORM ACCELERATOR PEDAL RELEASED POSITION LEARNING 

    Refer to "WORK PROCEDURE ".

    : GO TO 3.

  3. PERFORM THROTTLE VALVE CLOSED POSITION LEARNING 

    Refer to "WORK PROCEDURE ".

    : GO TO 4.

  4. PERFORM IDLE AIR VOLUME LEARNING 

    Refer to "WORK PROCEDURE ".

    : END

scientia non olet · About LEMON Manuals