Component Inspection

WARNING: This page is about a different car, the 2014 Nissan Versa. However, it is still accessible from the selected car via links, so may be relevant.

CHECK CVT SHIFT SELECTOR (PARK POSITION SWITCH)

Turn ignition switch OFF.
Disconnect CVT shift selector connector.

Check continuity between CVT shift selector (park position switch) terminals.

CVT shift selector (park position switch)		Condition		Continuity
Terminal		Condition		Continuity
7	8	Selector lever: P position	Selector button: Released	No
		Selector lever: P position	Selector button: Pressed	Yes
		Selector lever: Other than P position		Yes

Is the inspection result normal?

YES: Inspection End.

NO: Replace CVT shift selector. Refer to "REMOVAL AND INSTALLATION ".