DTC Confirmation Procedure
- PERFORM DTC CONFIRMATION PROCEDURE
- Press push-button ignition switch under the following conditions to start engine, and wait 1 second or more.
CVT models
- CVT selector lever is in the P (Park) position.
- Depress the brake pedal
M/T models
- Shift lever: in the neutral position
- Clutch pedal: Not depressed
- Check DTC in Self Diagnostic Result mode of IPDM E/R using CONSULT.
Is DTC detected?
YES: Go to "DIAGNOSIS PROCEDURE ".
NO: Inspection End.
- Press push-button ignition switch under the following conditions to start engine, and wait 1 second or more.