LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2014 >> Sentra S, Standard Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Security Control System (With Intelligent Key) >> DTC/Circuit Diagnosis >> DTC B26F3: Starter Control Relay >> DTC Logic >> DTC Confirmation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Confirmation Procedure

  1. PERFORM DTC CONFIRMATION PROCEDURE 
    1. Press push-button ignition switch under the following conditions to start engine.

      CVT models 

      • Selector lever: In the Park (P) position
      • Brake pedal: Not depressed

      M/T models 

      • Shift lever: in the neutral position
      • Clutch pedal: Not depressed
    2. Wait 2 seconds after engine started.
    3. Check DTC in Self Diagnostic Result mode of BCM using CONSULT.

      Is DTC detected? 

      YES: Go to "DIAGNOSIS PROCEDURE ".

      NO: Inspection End.

scientia non olet · About LEMON Manuals