Component Function Check

With CONSULT

1. On the CONSULT screen, select "ENGINE": "DATA MONITOR": "BRAKE SW 2".
2. Check "STOP LAMP SW" indication under the following conditions.

   Monitor item	Condition		Indication
   STOP LAMP SW	Brake pedal	Slightly depressed	ON
   		Fully released	OFF

Without CONSULT

1. Turn ignition switch ON.
2. Check the voltage between ECM harness connector terminals under the following conditions.

   ECM			Condition		Voltage (Approx.)
   Connector	+	-
   	Terminal
   E16	115	128	Brake pedal	Slightly depressed	Battery voltage
   				Fully released	0 V

   Is the inspection result normal? 

   YES: INSPECTION END

   NO: Proceed to "DIAGNOSIS PROCEDURE ".