LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2014 >> Sentra SL >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Control System (Power Distribution System) >> DTC/Circuit Diagnosis >> DTC B2616: Ignition Relay Circuit >> Component Inspection
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Component Inspection

  1. CHECK IGNITION RELAY-2 
    1. Turn ignition switch OFF.
    2. Remove ignition relay-2.
    3. Check the continuity between ignition relay-2 terminals.
      Terminals Condition Continuity
      3 and 5 12 V direct current supply between terminals 1 and 2 Yes
      No current supply No
      Fig 1: Checking Continuity Between Ignition Relay-2 Terminals
      G04889520Courtesy of NISSAN NORTH AMERICA, INC.

      Is the inspection result normal? 

      YES: Inspection End.

      NO: Replace ignition relay-2.

scientia non olet · About LEMON Manuals