DRIVER SIDE: Side Air Bag Module: Notes

WARNING:

If the vehicle has been involved in a collision and the side air bag module has deployed, the seatback pad and seatback trim must be replaced.
Do not leave any objects (screwdrivers, tools, etc.) on the seat during repair. It can lead to personal injury if the side air bag module should accidentally deploy.
Always work from the side or back of the seatback, do not work in front of seat.
Do not attempt to disassemble the side air bag module.
Handle the side air bag module carefully. During removal, always hold the side air bag module, do not let it hang by the wire harness.
Do not use air tools or electric tools for servicing the seat assembly.
Do not insert any objects into the side air bag module.
Do not expose the side air bag module to temperatures exceeding 93°C (200°F).
Do not expose the side air bag module to any oil, grease, detergent or water.
Do not damage the chute, connectors, retainers, clips, module harness or the side air bag module.
Before servicing, turn ignition switch OFF, disconnect both battery terminals then wait at least three minutes.