Operation Condition

Operation condition of warning and information is as per the following table.

Warning/Information functions		Operation procedure
Intelligent Key system malfunction		A malfunction is detected on BCM and key warning lamp turns ON
OFF position warning		When condition A, B or condition C is satisfied Condition A Ignition switch: ACC position Door switch (driver side): ON (Door is open) Condition B Turn ignition switch from ON to OFF while door is open Condition C Intelligent Key backside is contacted to push-button ignition switch while brake pedal is depressed and ignition switch is LOCK or OFF (When the Intelligent Key battery is discharged) Door switch (driver side): ON (Door is open)
P position warning	For internal	Shift position: Other than P Engine is stopped (Ignition switch is turned from ON to OFF)
P position warning	For external	P position warning (For internal) operates Door switch: ON to OFF (Door is open to close) Intelligent Key cannot be detected inside the vehicle
ACC warning		After P position warning operates, or when ignition switch is turned ON immediately after P position warning operates Ignition switch: ACC
Take away warning	Door status changes from open to close	Ignition switch: Other than LOCK and OFF Door switch: ON to OFF (Door status changes from open to close) Registered Intelligent Key is not detected inside the vehicle
	Door status is open	Ignition switch: Other than LOCK and OFF Door switch: ON (Door is open) Registered Intelligent Key is not detected inside the vehicle during Key ID verification for 5 seconds
	Push button-ignition switch operation	Ignition switch: Other than LOCK position Push-button ignition switch is pressed Registered Intelligent Key is not detected inside the vehicle
Door lock operation warning		Door lock operation is requested while door lock operation condition of door request switch is not satisfied
Engine start information	Ignition switch is ON position	Ignition switch: ON position Shift position: P Engine is stopped
	Ignition switch is other than ON position	Ignition switch: Other than ON Shift position: P Intelligent Key is in the passenger room after driver door is opened and closed
	Ignition switch is ON position to OFF position	Ignition switch: ON position to OFF position Shift position: P position NOTE: Engine start information turns ON for several seconds and then turns OFF, when ignition switch is turned to the ON position from the OFF position. Engine start information does not turn ON until opening and closing of driver door is detected again.
Intelligent Key low battery warning		BCM detects that Intelligent Key is low battery, after ignition switch is turned ON
Key ID warning		Push-button ignition switch is pressed Registered Intelligent Key is not detected inside the vehicle