| MOTOR FAN REQ [1/2/3/4] |
x |
Indicates cooling fan speed signal received from ECM on CAN communication line |
| AC COMP REQ [On/Off] |
x |
Indicates A/C compressor request signal received from ECM on CAN communication line |
| TAIL & CLR REQ [On/Off] |
x |
Indicates position light request signal received from BCM on CAN communication line |
| HL LO REQ [On/Off] |
x |
Indicates low beam request signal received from BCM on CAN communication line |
| HL HI REQ [On/Off] |
x |
Indicates high beam request signal received from BCM on CAN communication line |
| FR FOG REQ [On/Off] |
x |
Indicates front fog light request signal received from BCM on CAN communication line |
| FR WIP REQ [Stop/1LOW/Low/Hi] |
x |
Indicates front wiper request signal received from BCM on CAN communication line |
| WIP AUTO STOP [STOP P/ACT P] |
x |
Indicates condition of front wiper auto stop signal |
| WIP PROT [Off/BLOCK] |
x |
Indicates condition of front wiper fail-safe operation |
| IGN RLY1-REQ [On/Off] |
|
Indicates ignition switch ON signal received from BCM on CAN communication line |
| IGN RLY [On/Off] |
x |
Indicates condition of ignition relay |
| PUSH SW [On/Off] |
|
Indicates condition of push-button ignition switch |
| INTER/NP SW [On/Off] |
|
Indicates condition of CVT shift position |
| ST RLY CONT [On/Off] |
|
Indicates starter relay status signal received from BCM on CAN communication line |
| IHBT RLY-REQ [On/Off] |
|
Indicates starter control relay signal received from BCM on CAN communication line |
| ST/INHI RLY [Off/ST/INHI] |
|
Indicates condition of starter relay and starter control relay |
| DETENT SW [On/Off] |
|
Indicates condition of CVT shift selector (park position switch) |
| DTRL REQ [Off] |
|
Indicates daytime light request signal received from BCM on CAN communication line |
| THFT HRN REQ [On/Off] |
|
Indicates theft warning horn request signal received from BCM on CAN communication line |
| HORN CHIRP [On/Off] |
|
Indicates horn reminder signal received from BCM on CAN communication line |