Data Monitor
| Monitored item [Unit] |
Description |
|---|---|
| ST ANGLE SENSOR SIGNAL [On/Off] |
Indicates [ON/OFF] status as judged from ITS control unit (Angle sensor transmits angle signal through CAN communication). |
| REVERSE SIGNAL [On/Off] |
Indicates [ON/OFF] status as judged from ITS control unit (TCM transmits reverse signal through CAN communication). |
| VEHICLE SPEED SIGNAL [On/Off] |
Indicates vehicle speed calculated from ITS control unit through CAN communication [ABS actuator and electric unit (control unit) transmits vehicle speed signal (wheel speed) through CAN communication]. |
| CAMERA SWITCH SIGNAL [On/Off] |
Indicates [ON/OFF] status of camera switch signal as judged from ITS control unit. |
| CAMERA OFF SIGNAL [On/Off] |
Indicates [ON/OFF] status of camera OFF signal as judged from ITS control unit. |
| ST ANGLE SENSOR TYPE [Absolute/Not] |
Indicates whether steering angle sensor type is absolute or not (ON means "controlling"). |
| STEERING GEAR RATIO TYPE [Type 0/1] |
Indicates the type of the steering gear ratio (type 1 or 2). |
| STEERING POSITION [LHD/RHD] |
Indicates the steering position (LHD or RHD). |
| REAR CAMERA IMAGE SIGNAL [OK/Not] |
Indicates the status of the rear camera image as read from ITS control unit through dedicated ITS communication lines. |
| WASH SW [On/Off] |
Indicates the state of the wash switch indicator output. |
| R-CAMERA COMM STATUS [OK/Not] |
Indicates the status of the rear camera communication status as read from ITS control unit through dedicated ITS communication lines. |
| R-CAMERA COMM LINE [OK/Not] |
Indicates the condition of the rear camera communication line whether transmitting properly through dedicated ITS communication lines. |
| PUMP COMM STATUS [OK/NG] |
Indicates the state of the communication signal from pump control unit. |
| ILL [On/Off] |
Indicates [ON/OFF] status of the illumination signal. |
| ITS SW 1 [On/Off] |
Indicates the state of the warning system switch as seen by the ITS control unit. |
| ITS SW 1 IND [On/Off] |
Indicates the state of the warning system switch indicator output. |
| TURN SIGNAL [Left/N/Right] |
Indicates [Left/N/Right] status of the turn signal output. |
| ITS SW 2 [On/Off/No setting] |
Indicates the state of the warning system secondary switch as seen by the ITS control unit. |
| ITS SW 2 IND [On/Off/No setting] |
Indicates the state of the warning system secondary switch indicator output. |