Work Procedure

Perform the camera aiming adjustment using CONSULT. Refer to DESCRIPTION .

GO TO STEP 2. 

Perform the "self-diagnosis" of "ITS control unit" using CONSULT. Check if any DTC is detected.

Is any DTC detected?

YES 

Perform the trouble diagnosis for the detected DTC. Refer to DTC INDEX .

NO 

GO TO STEP 3. 

1. Perform the LDW/BSW system action test. Refer to DESCRIPTION .
2. Check that the LDW/BSW system operates normally.

Is the inspection result normal?

YES 

Inspection End.

NO 

GO TO STEP 4. 

1. Perform "WASH ACTIVE" in "Active Test" using CONSULT.
2. Perform air and washer tube connection check by "AIR & WASH ACTIVE" in Active Test:

(1) Washer fluid output count on the rear view camera is 3 to 5 times → OK.

(2) Washer fluid output count on the rear view camera is 10 times → Check tube with yellow marking.

(3) Washer fluid output count on the rear view camera is 1 time → Check tube with green marking.

(4) No washer fluid output → Check tube with blue marking or check valve.

Inspection End.