Av Control Unit: Description: Notes
- The AV control unit is equipped with the following parts. It is the master unit integrated with functions and controls the multi-AV system.
Units Equipped HDD (Hard Disk Drive) AM/FM Electronic Tuner Satellite Radio Tuner CD/DVD drive USB Interface Bluetooth® module - Signals necessary for the vehicle information display function are received from ECM and the combination meter via CAN communication.
- Signals necessary for vehicle setting functions are sent and received with BCM via CAN communication.
- It inputs the signal for driving status recognition (vehicle speed signal, reverse signal, and parking brake signal).
- A possible route line is generated on the camera image from the rear view camera, and it is shown on the display.
- The AV control unit contains an HDD with map data and sensors used for automatic location calculation, i.e. a gyroscope (angular velocity sensor) and a G sensor.
- HDD
- The AV control unit records map data, traffic regulations data, and guidance information.
- Gyroscope
- Detects vehicle cornering condition.
- Acceleration sensor
- Detects the inclination angle and height variation of the vehicle.
- HDD
NOTE:
For details of each functions, refer to SYSTEM DESCRIPTION .