Diagnostic Test
- SAVING VEHICLE SPECIFICATION
CONSULT Configuration
Perform "Before Replace ECU" to save or print current vehicle specification. Refer to DESCRIPTION .
NOTE:If "Before Replace ECU" can not be used, use the "Manual Configuration".
GO TO STEP 2 .
- REPLACE AV CONTROL UNIT
Replace AV control unit. Refer to REMOVAL AND INSTALLATION .
GO TO STEP 3 .
- WRITING VEHICLE SPECIFICATION
Perform "After Replace ECU" or "Manual Configuration" to write vehicle specification. Refer to WORK PROCEDURE .
GO TO STEP 4 .
- OPERATION CHECK
Check that the operation of the AV control unit and camera images (fixed guide lines and predictive course lines) are normal.
WORK END