Component Inspection

WARNING: This page is about a different car, the 2016 Nissan Rogue. However, it is still accessible from the selected car via links, so may be relevant.

CHECK CVT SHIFT SELECTOR (PARK POSITION SWITCH)

Turn ignition switch OFF.
Disconnect CVT shift selector connector.

Check continuity between CVT shift selector (park position switch) terminals.

CVT shift selector (park position switch)		Condition		Continuity
Terminal		Condition		Continuity
12	13	Selector lever	P (Park) position	No
12	13	Selector lever	Other than above	Yes

Is the inspection result normal?

YES

Inspection End.

Replace CVT shift selector. Refer to REMOVAL AND INSTALLATION .