LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2015 >> Rogue S, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 93 (Security Control System (With Intelligent Key System) (DTC/Circuit Diagnosis)) >> DTC Diagnosis >> DTC B27D1: Start Cut Relay Off >> DTC Logic >> DTC Detection Logic
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Detection Logic

WARNING: This page is about a different car, the 2016 Nissan Rogue. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • If DTC B27D1 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC LOGIC .
  • If DTC B27D1 is displayed with DTC B2605, first perform the trouble diagnosis for DTC B2605. Refer to DTC LOGIC .
DTC No. Trouble diagnosis name DTC detecting condition Possible cause
B27D1 STARTER CUT RELAY OFF When comparing the starter cut relay signal (CAN) from IPDM E/R, BCM detects that starter cut relay is stuck in the OFF position for 1 second or more.
  • Harness or connectors

    (The CAN communication line is open or shorted.)

  • Harness or connector

    (Starter cut relay circuit is open or shorted.)

  • IPDM E/R
  • BCM
  • Starter cut relay
scientia non olet · About LEMON Manuals