Fail Safe List

WARNING: This page is about a different car, the 2016 Nissan Rogue. However, it is still accessible from the selected car via links, so may be relevant.

:Applicable : Not applicable

DTC No.	Detected items	Vehicle behavior
		Pattern			Others
		A	B	C	Others
P0011	Intake valve timing control	-	-	*	ECM activates the IVT intermediate lock control solenoid valve to bring the cam sprocket into an intermediate lock condition.
P0014 P0078	Exhaust valve timing control	-	-	*	-
P0101 P0102 P0103	Mass air flow sensor circuit	*	*	*	-
P0122 P0123 P0222 P0223 P2135	Throttle position sensor	-	-	-	The ECM controls the electric throttle control actuator in regulating the throttle opening in order for the idle position to be within +10 degrees. The ECM regulates the opening speed of the throttle valve to be slower than the normal condition. So, the acceleration will be poor.
P0171 P0172	Fuel injection system	*	-	-	-
P0197 P0198	Engine oil temperature sensor	-	-	-	Exhaust valve timing control does not function.
P0300 P0301 P0302 P0303 P0304	Misfire	*	-	-	-
P0500	Vehicle speed sensor	*	-	-	-
P050A	Cold start control	-	-	-	-
P0524	Engine oil pressure	-	-	-	ECM illuminates oil pressure warning lamp on the combination meter. Engine speed will not rise more than 4, 000 RPM due to the fuel cut. Fail-safe is canceled when ignition switch OFF → ON.
P052A P052B	Intake valve timing intermediate lock control	-	-	*	-
P0603	ECM	-	-	-	-
P0603	ECM	-	*	-	ASCD operation may be deactivated.
P0604	ECM	*	-	*	ASCD operation may be deactivated.
P0605 P060B	ECM	-	-	-	-
P0605 P060B	ECM	*	-	*	ASCD operation may be deactivated.
P0606	ECM	-	-	-	ASCD operation may be deactivated.
P0606	ECM	*	-	*	ASCD operation may be deactivated.
P0607	ECM	-	-	-	-
P0607	ECM	-	*	-	-
P060A	ECM	*	-	*	-
P060A	ECM	*	*	*	ASCD operation may be deactivated.
P0643	ECM	*	-	*	-
P1078	Exhaust valve timing control position sensor circuit	*	-	*	-
P1568	Signal invalid	-	-	-	Active trace control does not function.
P1805	Brake switch	-	-	-	ECM controls the electric throttle control actuator by regulating the throttle opening to a small range. Therefore, acceleration will be poor.
					Vehicle condition	Driving condition
					When engine is idling	Normal
					When accelerating	Poor acceleration
P2004	Intake manifold runner control valve	-	*	*	-
P2100 P2103	Throttle control motor relay	-	-	-	ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approx. 5 degrees) by the return spring.
P2101	Electric throttle control function	-	-	-	ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approx. 5 degrees) by the return spring.
P2118	Throttle control motor	-	-	-	ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approx. 5 degrees) by the return spring.
P2119	Electric throttle control actuator	-	*	-	-
P2122 P2123 P2127 P2128 P2138	Accelerator pedal position sensor	-	-	-	The ECM controls the electric throttle control actuator in regulating the throttle opening in order for the idle position to be within +10 degrees. The ECM regulates the opening speed of the throttle valve to be slower than the normal condition. So, the acceleration will be poor.