LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2015 >> Rogue Select AWD >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System (Diagnostic Trouble Codes (DTCS) P1226-P219A, Symptom Diagnosis And Specifications) >> DTC/Circuit Diagnosis >> ASCD Brake Switch >> Component Function Check >> Diagnostic Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnostic Test

  1. CHECK FOR ASCD BRAKE SWITCH FUNCTION

    G-20With CONSULT 

    1. Turn ignition switch ON.
    2. Select "BRAKE SW1" in "DATA MONITOR" mode with CONSULT.
    3. Check "BRAKE SW1" indication under the following conditions.
      Monitor item Condition Indication
      BRAKE SW1 Brake pedal Slightly depressed OFF
      Fully released ON

    G-21Without CONSULT 

    1. Turn ignition switch ON.
    2. Check the voltage between ECM harness connector and ground.
      ECM Ground Condition Voltage (V)
      Connector Terminal
      E16 110
      (ASCD brake switch signal)      		 Ground Brake pedal Slightly depressed Approx. 0
      Fully released Battery voltage

    Is the inspection result normal?

    YES 

    INSPECTION END.

    NO 

    Refer to DIAGNOSIS PROCEDURE .

scientia non olet · About LEMON Manuals