LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2015 >> Sentra FE+S >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Security Control System (With Intelligent Key) >> DTC/Circuit Diagnosis >> DTC B2556: Push-Button Ignition Switch >> DTC Logic >> DTC Confirmation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Confirmation Procedure

  1. PERFORM DTC CONFIRMATION PROCEDURE

    1. Press push-button ignition switch under the following condition.
      • Brake pedal: Not depressed
    2. Release push-button ignition switch and wait 100 seconds or more.
    3. Check DTC in Self Diagnostic Result mode of BCM using CONSULT.

    Is DTC detected?

    YES 

    Go to DIAGNOSIS PROCEDURE .

    NO 

    Inspection End.