Data Monitor
| Monitor Item [Unit] | Main Signals |
Description |
|---|---|---|
| MOTOR FAN REQ [%] | * | Indicates cooling fan speed signal received from ECM on CAN communication line |
| AC COMP REQ [On/Off] | * | Indicates A/C compressor request signal received from ECM on CAN communication line |
| TAIL&CLR REQ [On/Off] | * | Indicates position light request signal received from BCM on CAN communication line |
| HL LO REQ [On/Off] | * | Indicates low beam request signal received from BCM on CAN communication line |
| HL HI REQ [On/Off] | * | Indicates high beam request signal received from BCM on CAN communication line |
| FR FOG REQ [On/Off] | * | Indicates front fog light request signal received from BCM on CAN communication line |
| FR WIP REQ [Stop/1LOW/Low/Hi] | * | Indicates front wiper request signal received from BCM on CAN communication line |
| WIP AUTO STOP [STOP P/ACT P] | * | Indicates condition of front wiper auto stop signal |
| WIP PROT [Off/BLOCK] | * | Indicates condition of front wiper fail-safe operation |
| IGN RLY1 - REQ [On/Off] | Indicates ignition switch ON signal received from BCM on CAN communication line | |
| IGN RLY [On/Off] | * | Indicates condition of ignition relay |
| INTER/NP SW [On/Off] | Indicates condition of CVT shift position | |
| ST RLY CONT [On/Off] | Indicates starter relay status signal received from BCM on CAN communication line | |
| IHBT RLY - REQ [On/Off] | Indicates starter control relay signal received from BCM on CAN communication line | |
| ST/INHI RLY [Off/ ST /INHI] | Indicates condition of starter relay and starter control relay | |
| DETENT SW [On/Off] | Indicates condition of CVT shift selector (park position switch) | |
| DTRL REQ [Off] | Indicates daytime running light request signal received from BCM on CAN communication line | |
| THFT HRN REQ [On/Off] | Indicates theft warning horn request signal received from BCM on CAN communication line | |
| HORN CHIRP [On/Off] | Indicates horn reminder signal received from BCM on CAN communication line |