| Outer socket |
Swinging torque |
0.3 - 2.9 N•m (0.03 - 0.29 kg-m, 3.0 - 25 in-lb) |
- Measurement on spring balance
- Measuring point: cotter pin hole of stud
|
1.4 - 42.7 N (0.14 - 4.4 kg, 12 - 31 lb) |
| Rotating torque |
0.3 - 2.9 N•m (0.03 - 0.29 kg-m, 3.0 - 25 in-lb) |
| Axial end play |
0.4 mm (0.020 in) or less |
| Inner socket |
Swinging torque |
0.1 - 7.8 N•m (0.01 - 0.79 kg-m, 1.0 - 69 in-lb) |
- Measurement on spring balance
- Measuring point at * mark shown
|
0.8 - 64 N (0.082 - 6.5 kg, 0.18 - 14.4 lb) |
| Rotating torque |
0.0 - 16.7 N•m (0.00 - 1.70 kg-m, 0 - 12 ft-lb) |
| Axial end play |
0.2 mm (0.008 in) or less |
| Inner socket length (L) |
89.7 mm (3.5in) or less |
| |
 Courtesy of NISSAN NORTH AMERICA, INC.
|
|