Diagnostic Test
WARNING: This page is about a different car, the 2016 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
- SAVING VEHICLE SPECIFICATION
CONSULT Configuration
Perform "READ CONFIGURATION" to save or print current vehicle specification. Refer to DESCRIPTION .
NOTE:If "READ CONFIGURATION" can not be used, use the "WRITE CONFIGURATION - Manual selection" after replacing BCM.
GO TO STEP 2 .
- REPLACE BCM
Replace BCM. Refer to REMOVAL AND INSTALLATION .
GO TO STEP 3 .
- WRITING VEHICLE SPECIFICATION
Perform "WRITE CONFIGURATION - Config file" or "WRITE CONFIGURATION - Manual selection" to write vehicle specification. Refer to WORK PROCEDURE .
GO TO STEP 4 .
- INITIALIZE BCM (NATS)
Perform BCM initialization. (NATS)
Inspection End.