LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2016 >> Altima Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 530 (Power Window Control System) >> Basic Inspection >> Inspection And Adjustment >> Additional Service When Replacing Control Unit >> Special Repair Requirement >> Initialization Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Initialization Procedure

WARNING: This page is about a different car, the 2016 Infiniti QX70. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery negative terminal or power window main switch connector. Reconnect it after a minute or more.
  2. Close the door.
  3. Turn ignition switch ON.
  4. Operate power window switch to fully open the window. (This operation is unnecessary if the window is already fully open)
  5. Continue pulling the power window switch UP (AUTO-UP operation). Even after glass stops at the fully closed position, keep pulling the switch for 3 seconds or more.
  6. Initializing procedure is completed.
  7. Inspect anti-pinch function.
scientia non olet · About LEMON Manuals