Fail Safe List

WARNING: This page is about a different car, the 2017 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

:Applicable : Not applicable

DTC No.	Detected items	Vehicle behavior
		Pattern						Others
		A	B	C	D	E	F	Others
U012E U042F	Engine communication	-	-	*	*	-	-	ECM stops the electric valve timing control. (The camshaft returns to the position of most retard angle.)
U012E U042F	Engine communication	-	-	*	*	*	-
P0010 P0020	Electric intake valve timing control module	-	-	*	*	-	-	ECM stops the electric valve timing control. (The camshaft returns to the position of most retard angle.)
P0010 P0020	Electric intake valve timing control module	-	-	*	*	*	-
P0011 P0012 P0021 P0022	Intake valve timing control	-	-	*	-	-	-	ECM stops the electric valve timing control. (The camshaft returns to the position of most retard angle.) NOTE: When VTC mechanism sticks, camshaft position does not change from position of stuck angle.
P0016 P0018	Intake valve timing control	-	-	-	-	-	-
P0014 P0015 P0017 P0019 P0024 P0025	Exhaust valve timing control	-	-	*	-	-	-	-
P0078 P0084	Exhaust valve timing control solenoid valve	-	-	*	-	-	-	-
P0087 P0088	Fuel rail pressure control	*	-	-	*	-	-	-
P0087 P0088	Fuel rail pressure control	*	*	*	*	-	-	-
P0090	High pressure fuel pump	*	*	*	*	-	-	-
P0101	Mass air flow sensor	*	-	-	*	-	-	-
P0101		*	*	*	*	*	*	-
P0102 P0103		*	*	*	*	*	*	-
P0117 P0118	Engine coolant temperature sensor	-	-	-	*	*	-	-
P0122 P0123 P0222 P0223 P2135	Throttle position sensor	-	-	*	-	-	-	The ECM controls the electric throttle control actuator in regulating the throttle opening in order for the idle position to be within +10 degrees. The ECM regulates the opening speed of the throttle valve to be slower than the normal condition. So, the acceleration will be poor.
P0171 P0172 P0174 P0175	Fuel injection system	*	-	-	*	*	-	-
P0190	Fuel rail pressure sensor	*	-	*	*	*	-	-
P0191 P0192 P0193	Fuel rail pressure sensor	*	-	-	*	-	-	-
P0197 P0198	Engine oil temperature sensor	-	-	-	-	-	-	Exhaust valve timing control does not function.
P0201 P0202 P0203 P0204 P0205 P0206	Fuel injector	*	*	-	*	-	-	-
P0300 P0301 P0302 P0303 P0304 P0305 P0306	Misfire	*	-	-	*	*	-	-
P0335	Crankshaft position sensor	-	-	*	*	-	-	-
P0335	Crankshaft position sensor	-	-	*	*	*	-	-
P0340 P0345	Intake camshaft position sensor	-	-	*	*	-	-	-
P0340 P0345		-	-	*	*	*	-	-
P1140 P1145		*	-	*	*	*	*	-
P0365 P0390	Exhaust camshaft position sensor	-	-	*	-	-	-	-
P0500	Vehicle speed sensor	*	-	-	*	*	-	-
P0524	Engine oil pressure	-	-	-	-	-	-	ECM illuminates engine oil pressure warning lamp on the combination meter. Engine speed will not rise more than 4, 000 RPM due to the fuel cut. Fail-safe is canceled when ignition switch OFF → ON.
P0603 P0607	ECM	-	-	-	-	-	-	-
P0603 P0607		*	*	-	-	-	-	ASCD operation may be deactivated.
P0604		-	-	*	-	-	-	ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approx. 5 degrees) by the return spring.
P0605 P0606		-	-	-	-	-	-	-
P0605 P0606		-	-	*	-	-	-	ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approx. 5 degrees) by the return spring.
P060A		-	-	*	-	-	-	ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approx. 5 degrees) by the return spring.
P060A		*	*	*	-	-	-	ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approx. 5 degrees) by the return spring. ASCD operation may be deactivated.
P060B		-	-	*	-	-	-	ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approx. 5 degrees) by the return spring.
P062B		-	-	-	-	-	-	-
P062B		*	*	-	*	-	-	-
P0641	Sensor power supply	-	-	*	*	-	-	ECM stops the electric valve timing control. (The camshaft returns to the position of most retard angle.)
P0641		-	-	*	*	*	-
P0643		-	-	*	-	-	-	ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approx. 5 degrees) by the return spring.
P1197	Out of gas	-	-	*	-	-	-	-
P119A P119B P119C	Fuel pressure sensor	*	-	-	*	-	-	-
P1805	Brake switch	-	-	-	-	-	-	ECM controls the electric throttle control actuator by regulating the throttle opening to a small range. Therefore, acceleration will be poor.
								Vehicle condition	Driving condition
								When engine is idling	Normal
								When accelerating	Poor acceleration
P2100 P2103	Throttle control motor relay	-	-	*	-	-	-	ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approx. 5 degrees) by the return spring.
P2101	Electric throttle control	-	-	*	-	-	-	ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approx. 5 degrees) by the return spring.
P2118	Throttle control motor	-	-	*	-	-	-	ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approx. 5 degrees) by the return spring.
P2119	Electric throttle control actuator	*	*	-	-	-	-	-
P2119	Electric throttle control actuator	-	-	*	-	-	-	ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approx. 5 degrees) by the return spring.
P2122 P2123 P2127 P2128 P2138	Accelerator pedal position sensor	-	-	*	-	-	-	-
P23E9 P23EA P2614 P2615	Intake camshaft position sensor (electric intake valve timing control signal)	-	-	*	*	-	-	ECM stops the electric valve timing control. (The camshaft returns to the position of most retard angle.)
P23E9 P23EA P2614 P2615		-	-	*	*	*	-
P23EB P2616		-	-	*	*	-	-
P2617 P2618	Crankshaft position sensor (electric intake valve timing control signal)	-	-	*	*	-	-	ECM stops the electric valve timing control. (The camshaft returns to the position of most retard angle.)
P2619		-	-	*	*	*	-
P34A4 P34A5 P34A6 P34A7 P34A8 P34A9 P34AA P34AB P34AC P34AD P34B0 P34B1	Electric intake valve timing control actuator	-	-	*	*	-	-	ECM stops the electric valve timing control. (The camshaft returns to the position of most retard angle.) NOTE: Normal bank transitions intermediate F/S valve timing.
P34C4 P34C5	Electric intake valve timing control actuator	-	-	*	*	-	-	ECM stops the electric valve timing control. (The camshaft returns to the position of most retard angle.)
P34C8	Electric intake valve timing control module	-	-	*	*	-	-	ECM stops the electric valve timing control. (The camshaft returns to the position of most retard angle.)
P34C8	Electric intake valve timing control module	-	-	*	*	*	-