Theft Warning Alarm - Operation Flow
| No. | System state | Switching condition | ||
|---|---|---|---|---|
| 1 | DISARMED to PRE-ARMED | When all conditions of A and one condition of B is satisfied. | A | B |
|
All doors are locked by:
|
|||
| 2 | PRE-ARMED to ARMED | When all of the following conditions are satisfied for 30 seconds. |
|
|
| 3 | ARMED to ALARM | When all conditions of A and B are satisfied. | A | B |
| Intelligent Key: Not used |
|
|||
| 4 | DISARMED to PRE-RESET | No conditions. | ||
| 5 | PRE-ARMED to PRE-RESET | |||
| 6 | ARMED to PRE-RESET | |||
| 7 | ALARM to PRE-RESET | |||
| 8 | PRE-RESET to DISARMED | |||
| 9 | PRE-RESET to PRE-ARMED | |||
| 10 | PRE-ARMED to DISARMED | When one of the following condition is satisfied. |
|
|
| 11 | ARMED to DISARMED |
When one of the following condition is satisfied. |
|
|
| 12 | ALARM to DISARMED |
|||
| 13 | RE-ALARM | When the following condition is satisfied after the ALARM operation is finished. |
|
|
NOTE:
- BCM ignores the door key cylinder UNLOCK switch signal input for 1 second after the door key cylinder LOCK switch signal input.
- To lock/unlock all doors by operating remote controller button of Intelligent Key or door request switch, Intelligent Key must be within the detection area of outside key antenna. For details, refer to SYSTEM DESCRIPTION .
- To open back door by operating back door opener switch, Intelligent Key must be within the detection area of outside key antenna. For details, refer to SYSTEM DESCRIPTION .