Theft Warning Alarm - Operation Flow

Fig 1: Theft Warning Alarm Operation Flow Diagram

Courtesy of NISSAN NORTH AMERICA, INC.

No.	System state	Switching condition
1	DISARMED to PRE-ARMED	When all conditions of A and one condition of B is satisfied.	A	B
1	DISARMED to PRE-ARMED		Power switch: OFF All doors: Closed Hood: Closed	All doors are locked by: Door key cylinder LOCK switch LOCK button of Intelligent Key Door request switch Door lock and unlock switch
2	PRE-ARMED to ARMED	When all of the following conditions are satisfied for 30 seconds.	Power switch: OFF All doors: Locked Hood: Closed
3	ARMED to ALARM	When condition A and one condition of B are satisfied.	A	B
3	ARMED to ALARM	When condition A and one condition of B are satisfied.	Intelligent Key: Not used	Any door: Open Hood: Open
4	DISARMED to PRE-RESET	When all conditions of A and one condition of B are satisfied.	A	B
4	DISARMED to PRE-RESET		Power switch: OFF All doors: Closed Hood: Open	All doors are locked by: Door key cylinder LOCK switch LOCK button of Intelligent Key Door request switch
5	PRE-ARMED to PRE-RESET	When the following condition is satisfied.	Hood: Open
6	ARMED to PRE-RESET	No conditions.
7	ALARM to PRE-RESET	No conditions.
8	PRE-RESET to DISARMED	When one of the following condition is satisfied.	Power switch: ACC/ON Door key cylinder UNLOCK switch: ON UNLOCK button of Intelligent Key: ON Door request switch: ON Back door opener switch: ON UNLOCK switch of door lock and unlock switch: ON Any door: Open
9	PRE-RESET to PRE-ARMED	When one of the following condition is satisfied.	Power switch: OFF All doors: Locked Hood: Closed
10	PRE-ARMED to DISARMED	When one of the following condition is satisfied.	Power switch: ACC/ON Door key cylinder UNLOCK switch: ON UNLOCK button of Intelligent Key: ON Door request switch: ON Back door opener switch: ON Any door: Open
11	ARMED to DISARMED	When one of the following condition is satisfied.	Power switch: ACC/ON Door key cylinder UNLOCK switch: ON UNLOCK button of Intelligent Key: ON Door request switch: ON Back door opener switch: ON
12	ALARM to DISARMED	When one of the following condition is satisfied.
13	RE-ALARM	When the following condition is satisfied after the ALARM operation is finished.	Any door: Open Hood: Open

NOTE:

BCM ignores the door key cylinder UNLOCK switch signal input for 1 second after the door key cylinder LOCK switch signal input.
To lock/unlock all doors by operating remote controller button of Intelligent Key or door request switch, Intelligent Key must be within the detection area of outside key antenna. For details, refer to SYSTEM DESCRIPTION .
To open back door by operating back door opener switch, Intelligent Key must be within the detection area of outside key antenna. For details, refer to SYSTEM DESCRIPTION .