LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2016 >> Maxima S >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Driver Assistance System (ADAS Control Unit)) >> ADAS Control Unit >> DTC/Circuit Diagnosis >> DTC C1A13: Stop Lamp Relay >> DTC Description >> DTC Detection Logic
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Detection Logic

WARNING: This page is about a different car, the 2015 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
DTC No. CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
C1A13 STOP LAMP RLY FIX
(Stop lamp relay fix)
Diagnosis condition When Ignition switch is ON.
Signal (terminal) -
Threshold
  • Stop lamp inactive state continues for 0.3 seconds or more despite the outputting of an ICC sensor ICC brake hold relay drive signal
  • The stop lamp remains ON for 60 seconds or more under the following conditions:
    • Driving at 40 km/h (25 MPH) or more
    • No stop lamp drive signal output from ADAS control unit
    • No brake operation
Diagnosis delay time -