DTC Description
WARNING: This page is about a different car, the 2015 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
DTC DETECTION LOGIC
| DTC No. | CONSULT screen terms (Trouble diagnosis content) |
DTC detection condition | |
|---|---|---|---|
| U1000 | CAN COMM CIRCUIT (CAN communication circuit) |
Diagnosis condition | When Ignition switch is ON. |
| Signal (terminal) | - | ||
| Threshold | If side radar RH is not transmitting or receiving ITS communication signal | ||
| Diagnosis delay time | 2 seconds or more | ||
POSSIBLE CAUSE
ITS communication system
FAIL-SAFE
The following systems are canceled:
- Blind Spot Warning (BSW)
- Rear Cross Traffic Alert (RCTA)
DTC CONFIRMATION PROCEDURE
- PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
- Start the engine.
- Turn the Blind Spot Warning system ON.
- Perform "All DTC Reading" mode.
- Check if "U1000" is detected as the current malfunction in "Self Diagnostic Result" mode of "SIDE RADAR RIGHT/LEFT".
Is "U1000" detected?
YES
Refer to DIAGNOSIS PROCEDURE .
NO - 1
To check malfunction symptom before repair: Refer to INTERMITTENT INCIDENT .
NO - 2
Confirmation after repair: Inspection End.