DTC Confirmation Procedure
WARNING: This page is about a different car, the 2015 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
- Press the push-button ignition switch under the following conditions, and wait for at least 1 second.
- CVT selector lever is in the P (park) or N (neutral) position.
- Release the brake pedal.
- Perform "Self Diagnostic Result" mode.
Is DTC B261A detected?
YES
Refer to DIAGNOSIS PROCEDURE .
NO
Inspection End.
- Press the push-button ignition switch under the following conditions, and wait for at least 1 second.