Values On The Diagnosis Tool
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.
| Monitor item | Condition | Value/Status | |
|---|---|---|---|
| MAIN SW | Ignition switch ON | When MAIN (ON/OFF) switch is pressed. | On |
| When MAIN (ON/OFF) switch is not pressed. | Off | ||
| SET/COAST SW | Ignition switch ON | When SET/COAST switch is pressed. | On |
| When SET/COAST switch is not pressed. | Off | ||
| CANCEL SW | Ignition switch ON | When CANCEL switch is pressed. | On |
| When CANCEL switch is not pressed. | Off | ||
| RESUME/ACC SW | Ignition switch ON | When RESUME/ACCELERATE switch is pressed. | On |
| When RESUME/ACCELERATE switch is not pressed. | Off | ||
| DISTANCE SW | Ignition switch ON | When DISTANCE switch is pressed. | On |
| When DISTANCE switch is not pressed. | Off | ||
| CRUISE OPE | Drive the vehicle and activate the ICC system | When ICC system is controlling. | On |
| When ICC system is not controlling. | Off | ||
| BRAKE SW | Ignition switch ON | When brake or clutch pedal is depressed. | Off |
| When brake or clutch pedal is not depressed. | On | ||
| STOP LAMP SW | Ignition switch ON | When brake pedal is depressed. | On |
| When brake pedal is not depressed. | Off | ||
| IDLE SW | Engine running | Idling | On |
| Except idling (depress accelerator pedal) | Off | ||
| SET DISTANCE |
|
When set to "long" | Long |
| When set to "middle" | Mid | ||
| When set to "short" | Short | ||
| CRUISE LAMP | Start the engine and press MAIN switch | ICC system ON (MAIN switch indicator ON). |
On |
| ICC system OFF (MAIN switch indicator OFF). |
Off | ||
| OWN VHCL |
NOTE:
The item is indicated, but not monitored |
Off | |
| VHCL AHEAD | Drive the vehicle and activate the ICC system | When a vehicle ahead is detected (vehicle ahead detection indicator ON). | On |
| When a vehicle ahead is not detected (vehicle ahead detection indicator OFF). | Off | ||
| ICC WARNING | Start the engine and press MAIN switch | When ICC system is malfunctioning (ICC system malfunction ON). |
On |
| When ICC system is normal (ICC system malfunction OFF). |
Off | ||
| VHCL SPEED SE | While driving | Displays the vehicle speed calculated by ADAS control unit | |
| SET VHCL SPD | While driving | When vehicle speed is set. | Displays the set vehicle speed |
| BUZZER O/P | Engine running | When the buzzer of the following system operates:
|
On |
When the buzzer of the following system does not operate:
|
Off | ||
| THRTL SENSOR |
NOTE:
The item is indicated, but not monitored. |
0.0 | |
| ENGINE RPM | Engine running | Equivalent to tachometer reading | |
| WIPER SW | Ignition switch ON | Wiper not operating. | Off |
| Wiper LO operation. | Low | ||
| Wiper HI operation. | High | ||
| YAW RATE |
NOTE:
The item is indicated, but not monitored. |
0.0 | |
| BA WARNING | Engine running | FEB OFF indicator lamp ON.
|
On |
FEB OFF indicator lamp OFF.
|
Off | ||
| STP LMP DRIVE | Drive the vehicle and activate the ICC system | When ICC brake hold relay is activated. | On |
| When ICC brake hold relay is not activated. | Off | ||
| D POSITION SW | Engine running | When the shift selector is in "D" position or manual mode. | On |
| When the shift selector is in any position other than "D" or manual mode. | Off | ||
| NP RANGE SW | Engine running | When the shift selector is in "N" or "P" position. | On |
| When the shift selector is in any position other than "N" or "P". | Off | ||
| PKB SW | Ignition switch ON | When the parking brake is applied. | On |
| When the parking brake is released. | Off | ||
| PWR SUP MONI | Engine running | Power supply voltage value of ADAS control unit | |
| VHCL SPD AT | While driving | Value of CVT vehicle speed sensor signal | |
| THRTL OPENING | Engine running | Depress accelerator pedal. | Displays the throttle position |
| GEAR | While driving | Displays the gear position | |
| CLUTCH SW SIG | Ignition switch ON | When clutch or brake pedal is depressed. | On |
| When clutch or brake pedal is not depressed. | Off | ||
| NP SW SIG | Ignition switch ON | When the shift selector is in neutral position. | On |
| When the shift selector is in any position other than neutral. | Off | ||
| MODE SIG | Start the engine and press MAIN switch | When ICC system is deactivated. | Off |
| When ICC system is activated. | ICC | ||
| SET DISP IND | Press SET/COAST switch | SET switch indicator ON. | On |
| SET switch indicator OFF. | Off | ||
| DISTANCE | Drive the vehicle and activate the ICC system | When a vehicle ahead is detected. | Displays the distance from the preceding vehicle |
| When a vehicle ahead is not detected. | 0.0 | ||
| RELATIVE SPD | Drive the vehicle and activate the ICC system | When a vehicle ahead is detected. | Displays the relative speed. |
| When a vehicle ahead is not detected. | 0.0 | ||
| ON ROOT GUIDE |
NOTE:
The item is indicated, but not monitored. |
Off | |
| FCW SYSTEM ON | Ignition switch ON | When the PFCW system is ON. | On |
| When the PFCW system is OFF. | Off | ||
| Shift position |
|
Displays the shift selector position | |
| Turn signal | Turn signal lamps OFF. | Off | |
| Turn signal lamp LH blinking. | LH | ||
| Turn signal lamp RH blinking. | RH | ||
| Turn signal lamp LH and RH blinking. | LH&RH | ||
| SIDE G | While driving | Vehicle turning right. | Negative value |
| Vehicle turning left. | Positive value | ||
| FUNC ITEM | Ignition switch ON | FUNC3 | |
| FUNC ITEM (FCW) | Engine running | On | |
| FUNC ITEM (BSW) | Engine running | On | |
| FUNC ITEM (NV-ICC) |
NOTE:
The item is indicated, but not monitored |
Off | |
| FCW SELECT | Ignition switch ON | "Forward Emergency Braking" set when the integral switch is ON. | On |
| "Forward Emergency Braking" set when the integral switch is OFF. | Off | ||
| BSW SELECT | Ignition switch ON | "Blind Spot Warning" set when the integral switch is ON. | On |
| "Blind Spot Warning" set when the integral switch is OFF. | Off | ||
| NAVI ICC SELECT |
NOTE:
The item is indicated, but not monitored. |
Off | |
| SYS SELECTABILITY | Ignition switch ON | Items set with the integral switch can be switched normally. | On |
| Items set with the integral switch cannot be switched normally. | Off | ||
| BSW WARN LMP | Engine running | When the BSW system is malfunctioning. | On |
| When the BSW system is normal. | Off | ||
| BSW SYSTEM ON | Ignition switch ON | When the BSW system is ON. | On |
| When the BSW system is OFF. | Off | ||
| FCW SYSTEM ON | Engine running | When the FEB/PFCW system is ON. | On |
| When the FEB/PFCW system is OFF. | Off | ||
| BATTERY CIRCUIT OFF |
NOTE:
The item is indicated, but not used. |
Off | |
| SYSTEM CANCEL MESSAGE | Engine running | System cancel display ON. | On |
| System cancel display OFF. | Off | ||
| BSW ON INDICATOR | Engine running | BSW system display ON. | On |
| BSW system display OFF. | Off | ||
| SIDE RADAR BLOCK COND | Engine running | Front bumper or side radar is dirty. | On |
| Front bumper and side radar are clean. | Off | ||
| BSW IND BRIGHTNESS | Ignition switch ON | BSW system OFF. | Nothing |
| Blind Spot Warning indicator brightness bright. | Bright | ||
| Blind Spot Warning indicator brightness normal. | Normal | ||
| Blind Spot Warning indicator brightness dark. | Dark | ||
| SL MAIN SW | Engine running | When speed limiter MAIN switch is pressed. | On |
| When speed limiter MAIN switch is not pressed. | Off | ||
| FUNC ITEM (FEB) | Engine running | On | |
| FEB SELECT | Ignition switch ON | "Forward Emergency Braking" set when the integral switch is ON. | On |
| "Forward Emergency Braking" set when the integral switch is OFF. | Off | ||
| FEB SW | Engine running | FEB system ON. | On |
| FEB system OFF. | Off | ||
| SL TARGET VEHICLE SPEED | While driving | When vehicle speed is set. | Displays the set vehicle speed |
| SL SET LAMP |
|
Speed limiter SET indicator ON. | On |
| Speed limiter SET indicator OFF. | Off | ||
| SL LIMIT LAMP |
|
Speed limiter system ON. | On |
| Speed limiter system OFF. | Off | ||
| ASCD CANCEL (LOW SPEED) | Drive the vehicle and activate the ASCD | ASCD canceled by low vehicle speed. | On |
| Other than above. | Off | ||
| ASCD CANCEL (SPEED DIFF) | Drive the vehicle and activate the ASCD | ASCD canceled by difference between set speed and vehicle speed. | On |
| Other than above. | Off | ||
| KICK DOWN | Drive the vehicle and activate the speed limiter | When accelerator pedal is fully depressed. | On |
| Other than above. | Off | ||