Configuration (Av Control Unit): Description

Vehicle specification needs to be written with CONSULT because it is not written after replacing AV control unit.

Configuration has three functions as follows.

Function		Description
Read / Write Configuration	Before Replace ECU	Reads the vehicle configuration of current AV control unit. Saves the read vehicle configuration.
Read / Write Configuration	After Replace ECU	Writes the vehicle configuration with saved data.
Manual Configuration		Writes the vehicle configuration with manual selection.

NOTE:

Manual setting item: Items which need selection by vehicle specifications

Automatic setting item: Items which are written in automatically (Setting cannot be changed)

For some models and specifications, the automatic setting item may not be displayed.

CAUTION:

When replacing AV control unit, always perform "Re/programming, Configuration" with CONSULT. If not performed, AV control unit will not operate normally.

Complete the procedure of "Read / Write Configuration" in order.
Configuration is different for each vehicle model. Confirm configuration of each vehicle model.
Never perform "Read / Write Configuration" except for new AV control unit.
If you set incorrect "Read / Write Configuration", the AV control unit may not operate properly.