Error Location Display

The self - diagnosis results are judged depending on whether any error occurs from when "Self - Diagnosis" is selected until the self - diagnosis results are displayed.

However, the diagnosis results are judged normal if an error has occurred before the ignition switch is turned ON and then no error has occurred until the self - diagnosis start. Check the "Error Record" to detect any error that may have occurred before the self - diagnosis start because of this situation.

The error record displays the time and place of the most recent occurrence of that error. However, take note of the following points:

• Place of the error occurrence is represented by the longitude and latitude at the time an error occurred. If current location mark has deviated from the correct position, then the place of the error occurrence cannot be located correctly.
• The frequency of occurrence is displayed in a up-and-down manner.

Error item

Some error items may be displayed simultaneously according to the cause. If some error items are displayed simultaneously, the detection of the cause can be performed by the combination of display items.