Consult Functions
CONSULT performs the following functions via the communication with the around view monitor control unit:
| Diagnosis mode |
Description |
| Self Diagnostic Result |
Around view monitor control unit and CAN communication circuit connection diagnosis is performed. Current and previous malfunctions are displayed collectively. |
| Data Monitor |
Diagnosis of vehicle signal that is received by around view monitor control unit can be performed. |
| Work Support |
- Calibration and initialization of each camera can be performed.
- Fine tuning of Birds-Eye view can be performed.
- Target line calibration of front wide view and rear wide view can be performed.
- Display of predicted course line can be switched to ON/OFF.
- Language of warning message can be selected.
- Neutral position adjustment of steering angle sensor can be performed.
- Camera screen activation enhancing display can be switched to ON/OFF.
- Calibration of turning radius display can be performed.
- Setting change can be performed depending on the vehicle specification with/without door mirror automatic retracting function.
- Camera zoom ratio can be changed and used for fine tuning.
|
| ECU Identification |
Around view monitor control unit part number, software version, and hardware version can be identified. |
| Configuration |
- The vehicle specification that is written in around view monitor control unit can be displayed or stored.
- The vehicle specification can be written when around view monitor control unit is replaced.
|