Work Procedure

CONSULT Configuration

Select "Re/programming, Configuration" of MULTI AV.

When writing saved data 

GO TO STEP 2  .

When writing manually 

GO TO STEP 3  .

CONSULT Configuration

Perform "After Replace ECU" of "Read / Write Configuration".

WORK END

CONSULT Configuration

1. Select "Manual Configuration".
2. Identify the correct model and configuration list. Refer to CONFIGURATION LIST .
3. Confirm and/or change setting value for each item.
   CAUTION:

   Thoroughly read and understand the vehicle specification. ECU control may not operate normally if the setting is not correct.

   NOTE:

   If items are not displayed, touch "Next". Refer to CONFIGURATION LIST  for written items and setting value.

4. Touch "Next".
5. Touch "OK".
   CAUTION:

   Make sure to select "OK" even if the indicated configuration of brand new AV control unit is the same as the desired configuration. If "OK" is not selected, configuration will not be complete.

6. Check that the configuration has been successfully written and touch "End".

GO TO STEP 4  .

Confirm that the AV control unit operates normally.

WORK END