Work Procedure
WARNING: This page is about a different car, the 2015 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
- WRITING MODE SELECTION
CONSULT Configuration
Select "CONFIGURATION" of AVM.
When writing saved data
GO TO STEP 2 .
When writing manually
GO TO STEP 3 .
- PERFORM "WRITE CONFIGURATION - Config file"
CONSULT Configuration
Perform "WRITE CONFIGURATION - Config file".
WORK END
- PERFORM "MANUAL CONFIGURATION"
CONSULT Configuration
Select "MANUAL CONFIGURATION" to write vehicle specifications into the around view monitor control unit.
CAUTION:- Thoroughly read and understand the vehicle specification. Incorrect settings may result in abnormal control of ECU.
- Make sure to select "NEXT" even if the default settings displayed on the CONSULT are the desired settings. If "NEXT" is not selected, the configuration process will be incomplete.
NOTE:If manual configuration items are not displayed, touch "NEXT".
GO TO STEP 4 .
- OPERATION CHECK
Confirm that each function controlled by around view monitor control unit operates normally.
WORK END