LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2016 >> Maxima SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Audio, Visual & Navigation System (Around View Monitor System)) >> DTC/Circuit Diagnosis >> DTC U1010: Control Unit (Can) >> Around View Monitor Control Unit >> DTC Description >> DTC Confirmation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2015 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

  1. PERFORM DTC CONFIRMATION PROCEDURE

    CONSULT

    1. Turn ignition switch ON.
    2. Turn ignition switch OFF and wait at least 30 seconds.
    3. Turn ignition switch ON and wait at least 2 seconds or more.
    4. Select "Self Diagnostic Result" mode of "AVM".
    5. Check DTC.

    Is DTC U1010 detected?

    YES 

    Proceed to DIAGNOSISPROCEDURE .

    NO-1 

    To check malfunction symptom before repair: INTERMITTENT INCIDENT .

    NO-2 

    Confirmation after repair: Inspection End.

scientia non olet · About LEMON Manuals