Operation Flow

WARNING: This page is about a different car, the 2015 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Theft Warning Alarm Operation Flow Diagram

Courtesy of NISSAN NORTH AMERICA, INC.

No.	System state	Switching condition
1	DISARMED to PRE-ARMED	When all conditions of A and one condition of B is satisfied.	A	B
1	DISARMED to PRE-ARMED		Power supply position: OFF/LOCK All doors: Closed Hood: Closed	All doors are locked by: Door key cylinder LOCK switch LOCK button of Intelligent Key Door request switch
2	PRE-ARMED to ARMED	When all of the following conditions are satisfied for 30 seconds.	Power supply position: OFF/LOCK All doors: Locked Hood: Closed
3	ARMED to ALARM	When one condition of A and one condition of B are satisfied.	A	B
3	ARMED to ALARM		Intelligent Key: Not used	Any door: Open Hood: Open
4	DISARMED to PRE-RESET	When all conditions of A and one condition of B is satisfied.	A	B
4	DISARMED to PRE-RESET		Power supply position: OFF/LOCK All doors: Closed Hood: Open	All doors are locked by: Door key cylinder LOCK switch LOCK button of Intelligent Key Door request switch
5	PRE-ARMED to PRE-RESET	When one of the following conditions is satisfied.	Hood: Open
6	ARMED to PRE-RESET	No conditions.
7	ALARM to PRE-RESET	No conditions.
8	PRE-RESET to DISARMED	When one of the following conditions is satisfied.	Power supply position: ACC/ON/CRANKING/RUN Door key cylinder UNLOCK switch: ON UNLOCK button of Intelligent Key: ON Door request switch: ON Back door opener switch: ON UNLOCK switch of door lock and unlock switch: ON Any door: Open
9	PRE-RESET to PRE-ARMED	When all of the following conditions are satisfied.	Power supply position: OFF/LOCK All doors: Closed Hood: Closed
10	PRE-ARMED to DISARMED	When one of the following conditions is satisfied.	Power supply position: ACC/ON/CRANKING/RUN Door key cylinder UNLOCK switch: ON UNLOCK button of Intelligent Key: ON AUTO BACK DOOR button of Intelligent Key: ON Door request switch: ON Back door opener switch: ON Any door: Open
11	ARMED to DISARMED	When one of the following conditions is satisfied.	Power supply position: ACC/ON/CRANKING/RUN Door key cylinder UNLOCK switch: ON UNLOCK button of Intelligent Key: ON AUTO BACK DOOR button of Intelligent Key: ON Door request switch: ON Back door opener switch: ON
12	ALARM to DISARMED	When one of the following conditions is satisfied.
13	RE-ALARM	When one of the following conditions is satisfied after the ALARM operation is finished.	Any door: Open Hood: Open

NOTE:

BCM ignores the door key cylinder UNLOCK switch signal input for 1 second after the door key cylinder LOCK switch signal input.
To lock/unlock all doors by operating remote control button of Intelligent Key or door request switch, Intelligent Key must be within the detection area of outside key antenna. For details, refer to SYSTEM DESCRIPTION .
To open back door by operating back door opener switch, Intelligent Key must be within the detection area of outside key antenna. For details, refer to SYSTEM DESCRIPTION .